home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Chip: Special Tips & Tricks for Windows 95
/
Chip Wintips.iso
/
sterown
/
inne
/
enqw95d
/
data.1
/
!HWP18C0.CFG
< prev
next >
Wrap
Text File
|
1994-06-21
|
3KB
|
109 lines
;
; Hewlett-Packard EtherTwist PC LAN Adapter NC/16 TP
; Configuration file version 1.00
; !HWP18C0.CFG 03-15-1993
;
; (C)Copyright Hewlett-Packard Co., 1992-1993
; All Rights Reserved.
; HP grants Intel the right to copy and distribute this file
; in the ICU database on 10/21/93.
BOARD
ID = "HWP18C0"
NAME = "HP EtherTwist PC LAN Adapter NC/16 TP (J2405A)"
MFR = "Hewlett-Packard Co."
CATEGORY = "NET"
SLOT = ISA16
LENGTH = 165
AMPERAGE = 500
BUSMASTER = 40
COMMENTS = "The HP PC LAN Adapter NC/16 TP is a 16-bit Type 10Base-T
compatible local area networking board.\n\n
Your board configuration parameters of I/O Address range,
DMA Channel, Interrupt Channel (IRQ) may be chosen
using this EISA configuration utility to match the
requirements of your computer. Your board also must be set
to match the values selected using the program HPNCSET.EXE
which is on the board's Support Disk."
SOFTWARE(1) = "
The following configuration parameters have been selected
for the HP PC LAN Adapter NC/16 TP.
The program HPNCSET.EXE must be used to
configure your board to match these values.
Your network software also may ask you for this data:\n"
FUNCTION = "HP PC LAN Adapter NC/16 TP (J2405A)"
TYPE = "NET"
CONNECTION = "One RJ-45 8-pin LAN connector"
SUBFUNCTION="I/O Address Range"
CHOICE = "300h - 317h (Factory default)"
LINK
PORT = 300h - 317h
INIT = SOFTWARE(1) "I/O Range: 300h-317h"
CHOICE = "320h - 337h"
LINK
PORT = 320h - 337h
INIT = SOFTWARE(1) "I/O Range: 320h-337h"
CHOICE = "340h - 357h"
LINK
PORT = 340h - 357h
INIT = SOFTWARE(1) "I/O Range: 340h-357h"
CHOICE = "360h - 377h"
LINK
PORT = 360h - 377h
INIT = SOFTWARE(1) "I/O Range: 360h-377h"
SUBFUNCTION = "DMA Channel"
CHOICE = "5 (Factory default)"
LINK
DMA = 5
INIT = Software(1) "DMA = 5"
CHOICE = "3"
LINK
DMA = 3
INIT = Software(1) "DMA = 3"
CHOICE = "6"
LINK
DMA = 6
INIT = Software(1) "DMA = 6"
CHOICE = "7"
LINK
DMA = 7
INIT = Software(1) "DMA = 7"
SUBFUNCTION = "Interrupt Channel (IRQ)"
CHOICE = "3 (Factory default)"
LINK
IRQ = 3
INIT = Software(1) "IRQ = 3"
CHOICE = "4"
LINK
IRQ = 4
INIT = Software(1) "IRQ = 4"
CHOICE = "5"
LINK
IRQ = 5
INIT = Software(1) "IRQ = 5"
CHOICE = "9"
LINK
IRQ = 9
INIT = Software(1) "IRQ = 9"
CHOICE = "10"
LINK
IRQ = 10
INIT = Software(1) "IRQ = 10"
CHOICE = "11"
LINK
IRQ = 11
INIT = Software(1) "IRQ = 11"
CHOICE = "12"
LINK
IRQ = 12
INIT = Software(1) "IRQ = 12"
CHOICE = "15"
LINK
IRQ = 15
INIT = Software(1) "IRQ = 15"